THE
FUNCTION
INTRODUCTION OF ROBO-PONG 2040 |
 |
Be
capable of putting any type of spin on the ball |
| |
Topspin,
backspin,sidespin, and even combination spins can easily be
selected. To change the spin, simply rotate the head of the
robot until the desired spin is at the top of the Ball Discharge
Hole. The Robot Head can go round and round for 360 degrees,
the angle and direction change with the rotation of the RH.
For combination spins, move the head until one of the rotational
arrows is at the top of the Ball Discharge Hole. |
| |
Ball
Speed, Frequency and Oscillation |
| |
Your
robot is extremely versatile and fully adjustable to suit a
wide variety of playing abilities and styles. Regulates the
Ball speed and spin by adjusting the Ball Speed and the time
between shots by adjusting the Ball Frequency; the lowest setting
can deliver 26 balls and the highest can deliver 90 balls per
minute; regulates the speed at which the robot head sweeps
side to side, the Robot Head can be positioned at desired direction
to deliver balls to one spot and also deliver balls to different
spots by setting the Robot Head sweeping side to side. |
| |
Ball
Trajectory |
| |
The
trajectory of a ball is regulated by adjusting the angle of
the robot head. The angle can be changed from low to high by
Loosening the Brass Knob on the right side of the robot head,
tilting the head to the desired angle and then re-tightening
the Brass Knob. |
| |
Oscillation
Range |
| |
Model
2040 has 8 selectable ranges by regulating the two Control Levers
at the back of the robot. The Right Control Lever is restricted
to positions 1, 2, & 3; the left to positions 4, 5, &
6. |
| |
Folding
Recycling System, recycle and circulate automatically |
| |
The
recycling system can recycle the balls if they are good returns,
and you can enjoy the playing in succession without picking
up the balls. The folding system is legerity, easy to pack away
and occupies only a little space. Easy to take after enclosed
in the Robot-Tote. |
| |
Change
Ball Size Switches from one to the other |
| |
Change
the Ball Sizes by setting the switches 38-40mm on both the left
and the right on the Robot Head at the same time. |
