| |
| No. |
Name |
Model |
Function |
| ① |
POWER |
RP-1040
RP-2040 |
Used
to turn the robot "ON" or "OFF". |
| ② |
BALL SPEED |
RP-540
RP-1040
RP-2040 |
Regulates
the ball speed and spin. Higher settings
increase the amount of spin and forward speed on
the ball. On the 540, this control also functions as
the on/off switch. |
| ③ |
BALL
FREQUENCY |
RP-540
RP-1040
RP-2040 |
Regulates
the time between shots. Lower settings
increase the time between shots. Higher settings
decrease time between shots. Lowest setting at
which balls will come out is approximately 2 (13 to
16 balls per minute). At a setting of 10, the robot
delivers approximately 90 balls per minute for the
1040 & 2040 models and 60 balls per minute for
the 540. |
| ④ |
OSCILLATOR
SPEED |
RP-1040
RP-2040 |
Regulates
the speed at which the robot head
sweeps side to side. Higher settings make the
head sweep faster. This control is also used to
position the head in the desired direction when you
want balls to be delivered to one spot. First set the
control levers on the rear of the robot to positions
3 & 4. Turn Oscillator Speed on, and when the
head reaches the desired position, turn it off. To
get your desired perfect points of falls, you can
adjust the moving speed of Robot Head to the
various Frequency accordingly. |
