| Maintenance
steps |
 |
| |
Step
1: Remove Balls From Tray
Or Bucket |
|
| |
Step
2: Loosen Wing Nuts |
|
| |
Step
3: Remove Robot Body |
|
| |
Step
4: Remove Clear Front Cover |
|
| |
Step
5: Remove Balls From Inside
Robot |
|
| |
Step
6: Clean Ball Feed Back Panel,
BF Dust-Free Pickup Finger And BF Collector Plate |
|
| |
Step
7: Sprinkle /Spray A Little
Robot Use Only Wax Or The Similar Products Such
As
The Furniture-Made Polish Wax Or "Bilizhu"(a kind
of wax) Etc, Then
Use A
Dry Section Of Cloth To Lightly Dry It Off. |
|
| |
Step
8: Clean The Ball Return
Tray And Center Through Or Ball Bucket To Wipe Off
The
Dirt With A Damp Cloth. When It Is Dry, Spinkle A Little Robot
Use
Only Wax
,Then Use A Dry Section Of Cloth To Lightly Dry It Off. |
|
| |
Step
9: Reattach The Clear Front
Cover. Reattach The Robot Body,Making Sure
That
It Fits Fully Down On The Locating Tab Of The Center Through
Or Ball
Bucket. |
|
| |
Step
10: Be Sure To Wash And Dry
The Dirty Balls Before Using Them With The
Robot. |
|
| |
Warning:
This Maintenance Should Be Made Once Two To Three Weeks According
To
The Surroundings. |
|
