|
|
|
| BALL
TRAJECTORY |
| |
 |
 |
|
| |
The
trajectory is adjusted by loosening the Brass Knob on the right
side of the
robot head, tilting the head to the desired
angle and re-tightening the Brass
Knob. |
|
|
| |
 |
|
| |
Robot
head is tilted too high, resulting in ball being thrown off
the end of the
table. |
|
|
| |
 |
|
| |
The
same ball speed as Figure A, but now robot head is tilted down
so the
ball lands on the table. |
|
| |
|
|
| |
 |
|
| |
When
robot is set to serve onto its side of table first, and the
head angle is too
severe, the ball will rebound abnormally
high. |
|
| |
|
|
| |
 |
|
| |
The
same ball speed as Figure C, but head angle has been
raised slightly so
ball stays low to the net. With robot serving,maximum
ball speed is limited to
3-5 before ball is thrown off the end
of table. |
|
| |
|
|
|
|
