|
|
 Troubleshooting |
|
 The
main reasons for the Robot troubles? |
 |
Why
should I wash and dry off the new balls before Leing used with
the
Robot? |
|
Why
should I wash the balls that being used with the Robot
periodically? |
|
| How
to deal with the distortioned and trampled balls? |
|
Why
the new bought Robot makes an abnormal sound while
shooting
and the sound is very noisy? |
|
Why
Robot pick up balls, but balls just fall out of discharge
opening
instead of shooting out? |
|
Why
the new bought Robot shoots erratically , some balls
delivered
high, others low or off to the side? |
|
| Can
the 38mm balls be mixed in with 40mm balls? |
|
| Why
the motors run slowly such as slow ball shooting and Ball
Speed even if the Robot has been correctly set? |
|
| Why
one or two motors don't run, but the others run normally? |
|
Why
the balls are shooting, but suddenly noises are heard
from
the Control Box and comes with that is the Robot's stop
shooting? |
|
Why
after the Pong-Master is set to the Robot, the Frequency
button
of the Control Box doesn't work,the Robot doesn't work? |
|
| Why
no Robot functions work and Power Switch on Control
Box doesn't light up when turned on? |
|
Why
no Robot functions work or only work intermittently, and
the Power
Switch lights up when turned on? |
|
Why
no Robot functions work or only work intermittently, and
the
Power Switch lights up when turned on? |
|
Why
the oscillator motor runs, but head doesn't move or move
in
a very limited range? |
|
| Why
the Robot head doesn't move even if correctly set? |
|
| Why
oscillator operates, but motion is jerky and / or straining
noises are heard? |
|
| Why
Robot shoots more than one ball at a time? |
|
| |
|
